Blog
Touch Screen
Decibel (dB) - a unit of power loss or attenuation used in EMI/RFI shielding:
1 decibel = 10 log (Power in/Power out).
A 3dB loss is a fifty percent power reduction.
Impactinator® Glass
Hydrofluoric acid is a solution of hydrogen fluoride in water. While it is extremely corrosive and dangerous to handle, it is technically a weak acid. Hydrogen fluoride, often in the aqueous form as hydrofluoric acid, is a valued source of fluorine, being the precursor to numerous pharmaceuticals (…
Home
Abstract
An introduction into the various common types of touch screen technology and the method of their operation. Strengths and weaknesses of each technology will also be discussed to provide a better understanding as to which type would be best to use in any given application.
Impactinator® Glass
Ohms/square is a measure of electrical resistance of a coating. It is defined as the measure of the electrical resistance of a layer of a coating.
Impactinator® Glass
Indium-Tin Oxide (ITO) - is known as indium tin oxide in German-speaking countries. A semiconducting chemical substance.
Impactinator® Glass
Caustic chemicals that can destroy or severely damage the flesh on contact. Such chemicals include various inorganic and organic acids and bases. The most familiar chemicals called caustics are sodium hydroxide (caustic soda, or lye) and potassium hydroxide (caustic potash). Other chemicals are…
Standards
MIL-STD-461E: DOD Interface Standard Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment (August 20, 1999)
Consolidates MIL-STD-461D and MIL-STD-462D into one Standard. EUT hardware and software must be representative of production.…
Impactinator® Glass
a coating, which reduces the reflectance of a surface by better optical coupling to the surface and therefore increasing the overall transmittance
Impactinator® Glass
Haze measures how a material or optical structure scatters light, indicating its clarity and transparency. It is an optical parameter that helps us understand the scattering behavior of a substance, impacting its visual appearance and optical properties. By quantifying haze, we can determine how…
Standards
The touch screen surface is unaffected by exposure to the following chemicals for one hour at 22 degrees C, 45% relative humidity. These chemicals include tea, coffee, ketchup, mustard, vinegar, beer, Coca-Cola, Red Wine, Cooking Oil, Wisk Laundry Detergent, Fantastik All Purpose Cleaner, Joy…
Touch Screen
As a rough guideline, you can calculate $6400 one-time costs. In addition, there is a purchase of about 50 pieces of your individual touchscreens.
These values can change if special customer-specific options have been selected, such as:
Optical anti-reflective coatings
Polarizer
Special substrate…
Touch Screen
If you operate the controller via USB, no external power supply is necessary. The controller is powered directly via the USB bus. When operating via RS232, you need an external power supply of +5V.
With our standard controllers for 4.5 and 8 analog resistive touchscreens, pin 4 must be supplied…
Touch Screen
It is possible to have a thicker microglass on top. Right now we are offering up to 0.2mm thick microglass as an option.
Touch Screen
The most generalized method among touch panel technologies.
By use of a pair of conductive films inserted between the upper and lower layer facing each other, if pressure exceeding a certain level is applied to a random position, the two conductive films are designed to touch each other. The basic…
Touch Screen
You can clean an ULTRA touchscreen with any commercially available cleaning agent.
Touch Screen
Strain coefficients at 20°C of common materials in the construction of touchscreen solutions
Touch Screen
At Interelectronix , the costs for development are only passed on to our customers as soon as tools have to be created.
No development costs are charged for:
-Consultation
Materials for which a tool already existsThe development service is free of charge. Additional options such as a laminate on…
Touch Screen
You can't connect the 5-pin cable incorrectly. The pinout of the controller is symmetrically arranged. By calibrating the controller, the orientation is automatically corrected.Of course, this only applies if you use our original controller IX5000 without a modified pinout . All 5 pins must be…
Touch Screen
In order to achieve a good bonding bond, the material surfaces to be bonded must be absolutely dry and clean. For cleaning, grease-free solvents such as heptane, isopropyl alcohol or alcohol are recommended.
Glue touch screen with high pressure and high temperature
During bonding, the highest…